Category Archives: Tuning Tools

The MSS65 / E6x M5 / M6 Binary Modification Tool has now been updated to include EVAP delete and Rear O2 delete options. Grab the latest version from the downloads page as usual.

ECUWorx are pleased to announce a new release of the E90/E92/E93 M3 Binary Modification Tool. The new release brings the long awaited EWS delete, throttle map adjustments, along with exhaust overrun pops and crackles (primary decat required!) and servotronic steering adjustment for both sport and comfort mode. Grab the latest release from the downloads page […]

Things have been super busy behind the scenes at ECUWorx but we’ve finally had time to update the MSS65 Binary Modification Tool to include support for the 520E software. An option for an EWS delete to allow DME swaps etc is now included too! Now uploaded to the downloads page.

Version 1.8 of the E9x M3 Binary Modification Tool has now been released, the update adds the provision to change the final drive ratio on a DCT equipped vehicle. Grab the latest version from the downloads section here. Thanks for your patience with this one, we’ve had the ability to change the ratio for over […]

ECUWorx are now able to offer high quality, super stable ECUWorx Flashing Cables for the E6x M5, E6x M6 and E9x M3, the cables are running the latest EdiabasLib firmware for safe and reliable flashing of ECUs and transmissions including but not limited to the following: – MSS60 ECU / DME– GD40 ECU / DME– […]

As per the title ECUWorx have just put together a new utility for you guys that can do a few basics on the vehicles DME. The software can be used with a standard K/DCAN cable (set to COM1) to do the following:– Read DME information such as VIN, DME type, DME software version, number of […]

In line with the release of the the BMW E6x M5 / M6 Binary Modification Tool and the fantastic MSS6x Flasher there are a number of new ‘how to‘ guides to go with the software. Be sure to check them out:– Taking a read with MSS6x Flasher– Using the BMW E6x M5 / M6 Binary […]

ECUWorx are pleased to annouce that the first release of the E6x M5 / M6 Binary Modification Tool is complete. The tool allows modification of files read from the vehicles ECU (MSS65). The tool allows modification of the following options: – Stage 1 & Stage 2 performance tune from 22RPD– VMax limit removal– Cold start […]

It’s been a while since we updated the MSS5x Binary Modification Tool for the E46 M3 & E39 M5 so we thought it was time to add some of the top requested features. New features include: Kess V2 reads are now support. Burble & Pop added for the E39 M5. AlphaN added for the E39 […]

A new batch of switched cables ECUWorx flashing cables for the E39 M5 and E46 M3 are now in stock and all back orders have been fulfilled.Please be aware that the shipping and processing of orders may be a little delayed though due to the current COVID19 situation so please be patient.Stay safe everyone!