As you can see, the ECUWorx website has been overhauled and updated, all existing articles and data have been migrated so everything ‘should’ still be where it was before. If you can’t find something, drop us a line and we’ll do our best to re-instate it.
The MSS65 / E6x M5 / M6 Binary Modification Tool has now been updated to include EVAP delete and Rear O2 delete options. Grab the latest version from the downloads page as usual.
Royal Mail have now resumed accepting international shipping, however items may take longer than usual to arrive, so please be patient when placing an order. Full details can be found here: https://www.royalmail.com/service-update
ECUWorx use Royal Mail for all UK and international shipping, however as of 7pm on January 13th 2023, Royal Mail have temporarily halted international postage due to a cyber incident. Once Royal Mail services are back online we will re-enable the international postage options. For more information, please see here. UK orders will not be […]
ECUWorx are pleased to announce a new release of the E90/E92/E93 M3 Binary Modification Tool. The new release brings the long awaited EWS delete, throttle map adjustments, along with exhaust overrun pops and crackles (primary decat required!) and servotronic steering adjustment for both sport and comfort mode. Grab the latest release from the downloads page […]
Things have been super busy behind the scenes at ECUWorx but we’ve finally had time to update the MSS65 Binary Modification Tool to include support for the 520E software. An option for an EWS delete to allow DME swaps etc is now included too! Now uploaded to the downloads page.
Version 1.8 of the E9x M3 Binary Modification Tool has now been released, the update adds the provision to change the final drive ratio on a DCT equipped vehicle. Grab the latest version from the downloads section here. Thanks for your patience with this one, we’ve had the ability to change the ratio for over […]
ECUWorx are now able to offer high quality, super stable ECUWorx Flashing Cables for the E6x M5, E6x M6 and E9x M3, the cables are running the latest EdiabasLib firmware for safe and reliable flashing of ECUs and transmissions including but not limited to the following: – MSS60 ECU / DME– GD40 ECU / DME– […]
As per the title ECUWorx have just put together a new utility for you guys that can do a few basics on the vehicles DME. The software can be used with a standard K/DCAN cable (set to COM1) to do the following:– Read DME information such as VIN, DME type, DME software version, number of […]
In line with the release of the the BMW E6x M5 / M6 Binary Modification Tool and the fantastic MSS6x Flasher there are a number of new ‘how to‘ guides to go with the software. Be sure to check them out:– Taking a read with MSS6x Flasher– Using the BMW E6x M5 / M6 Binary […]
